Step-by-step unboxing and set up
⚠️ Take care lifting
Two person lift required.Single person lift can cause injury.
STEP 1
Gently turn the box onto its side and open it up. When opening, don’t cut into the cardboard deeper than 1cm as this may damage the upholstery.
STEP 2
Take the BackHug device out by sliding it out on its side. Fold up the box and store it safely.
STEP 3
With the device on its side, insert the power cord. Make sure the BackHug device's switch is flicked to “I” for "on".
STEP 4
Carefully lift the BackHug device and place it down so it is standing on all 4 wooden legs.
STEP 5
Plug the socket into the mains. Your BackHug decide is now ready for use.